Timex Watch 866 095000 User Manual

W-90 866-095000  
THANK YOU FOR PURCHASING YOUR TIMEX WATCH.  
EXTENDED WARRANTY  
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase  
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during  
normal business hours. Payment must be made within 30 days of purchase. Name, address,  
telephone number, purchase date, and 5-digit model number required. You can also  
mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock,  
AR 72203.  
Please read instructions carefully to understand how to operate your Timex watch.  
Your model may not have all of the features described in this booklet.  
FUNCTIONS  
Real-time calendar clock, Second time zone, Countdown timer, Daily/weekday/weekend alarm,  
hourly chime, Chronograph with lap/split storage, INDIGLO® night-light with Night-Mode®  
Feature.  
BASIC OPERATIONS  
SET OR DONE  
(To save changes  
and exit setting  
START/SPLIT OR +  
(Increase value. Hold  
to increase rapidly.)  
MODE OR NEXT  
(Proceed to  
next step)  
STOP/RESET OR –  
(Decrease value. Hold  
to decrease rapidly.)  
INDIGLO  
When setting, each button has a different function as indicated above. Watch face will indicate  
when button changes function.  
Note: On your watch the day/date display may appear below the time display and the Indiglo  
button may be located at the 3 o’clock position.  
DEMO  
Press MODE until DEMO appears. This mode will allow you to view all the features of the  
watch. Each mode will appear for three seconds. Setting date will erase this feature. It will  
reappear when you change the battery.  
TIME/DATE/HOURLY CHIME/TIME ZONE  
1. In TIME mode, press and hold SET. Time zone will flash.  
2. To set, push + or – to select first or second time zone.  
3. Press NEXT. Hour digits flash.  
4. Press + or – to change hour including AM/PM. (Scroll through 12 hours to get to AM/PM).  
5. Press NEXT. Minute digits flash.  
6. Press + or – to change minutes.  
7. Press NEXT. Second digits flash.  
8. Press + or – to set seconds to zero.  
9. Press NEXT. Day of week flashes.  
10. Press + to – to change day.  
11. Continue pattern to set month, day of month, 12-hour or 24-hour time display, MM.DD or  
DD.MM date format, turn hourly CHIME on/off, turn BEEP on/off. If you select BEEP on, a  
beep will sound every time you push a button (except INDIGLO).  
12. Press DONE to confirm and exit or NEXT to continue and set second time zone, if desired.  
13. When in Time mode, press and hold START/SPLIT to “peek” at second time zone; hold for 4  
seconds to switch time zones.  
ALARM  
Setting the ALARM is similar to setting TIME. Your watch model has three alarms. Follow below  
procedure to set each alarm.  
1. Press MODE repeatedly until ALM1, ALM2, or ALM3 appears. Select alarm you want to set.  
2. Press SET to set alarm.  
3. Hour digits flash. Press + or – to change hour.  
4. Press NEXT. Minute digits flash. Press + or – to change minutes.  
5. Press NEXT. If in 12-hour format, AM/PM flashes. Press + or – to change.  
6. Press NEXT. Press + or – to select DAILY, WEEKDAYS OR WEEKENDS.  
7. Press DONE to confirm and exit.  
8. Press Start/Split or Stop/Reset to arm or disarm alarm. When disarmed, OFF will be displayed.  
When armed, the alarm clock icon will appear  
.
9. The INDIGLO night-light and alarm icon flashes and an alert sounds  
when the alarm goes off. Press any button to silence. A back up alarm will sound after five  
mintues if you don’t press any buttons.  
TIMER  
1. Press MODE repeatedly until TIMER appears.  
2. Press SET. Hour digits flash.  
3. Follow same pattern as setting TIME and ALARM to set hours (up to 24 hrs.), minutes, sec-  
onds, and select between REPEAT/AT END (timer counts down and then repeats) or STOP/AT  
END (the timer counts down and then stops).  
4. Press DONE to confirm and exit.  
5. Press START/SPLIT to start TIMER. Timer will continue to run even if you exit Timer mode. If  
REPEAT/END selected  
will flash. If STOP/END selected will flash.  
6. An alarm melody will chime and INDIGLO® night-light flashes when the timer has reached  
zero or before it starts to count down again.  
7. Press STOP/RESET to stop TIMER. Press again to reset to countdown time.  
(continued on reverse)  
 

Tascam CD Player CD 200 User Manual
Texas Instruments Network Card CC2511 User Manual
Toshiba Digital Camera PDR M71 User Manual
Toshiba DVD Player SD 4700 User Manual
Toshiba TV VCR Combo MV19N2 User Manual
Tricity Bendix Cooktop SI505 User Manual
Tut Systems Switch SMS2000 User Manual
Univex Camera Accessories KR SCH User Manual
Vestax Musical Instrument PMC CX User Manual
Vizio Blu ray Player VBR140 User Manual