Toshiba Security Camera NVR16 X User Manual

NVR  
Network Video Recorder  
Hardware Manual  
NVR8-X  
model no.  
NVR16-X  
Please carefully read these instructions before using this product.  
Save this manual for future use.  
 
iii  
Surveillix™ NVR  
Hardware Manual  
Manual Edition 27891AB –DECEMBER 2006  
Printed in USA  
No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the  
Software License Agreement. Toshiba shall not be liable for technical or editorial errors or omissions contained herein. The information in this  
document is subject to change without notice.  
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING  
OUT OF THE USE OF THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY DIRECT,  
CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION,  
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS INFORMATION), EVEN IF  
TOSHIBA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND WHETHER IN AN ACTION OR CONTRACT OR TORT,  
INCLUDING NEGLIGENCE.  
This software and documentation are copyrighted. All other rights, including ownership of the software, are reserved to DVR Support Center.  
TOSHIBA, and Surveillix are registered trademarks of TOSHIBA CORPORATION in the United States and elsewhere; Windows, and Windows  
XP Embedded are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks  
of the respective owners.  
The following words and symbols mark special messages throughout this guide:  
WARNING: Text set off in this manner indicates that failure to follow directions could result in  
bodily harm or loss of life.  
CAUTION: Text set off in this manner indicates that failure to follow directions could result in  
damage to equipment or loss of information.  
 
iv  
LIMITED WARRANTY  
NETWORK VIDEO RECORDER  
The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following limited  
warranties. These limited warranties extend to the Original End-User ("You[r]").  
Limited Two (2) Year Warranty of Labor and Parts  
The Imaging Systems Division of Toshiba America Information Systems warrants this product and parts against defects in  
material or workmanship for a period of two years from the date of original retail purchase by the end-user. During this period,  
ISD will repair or replace a defective product or part with a new or refurbished item. The user must deliver the entire product to  
the Surveillix DVR Repair Facility. The user is responsible for all transportation and insurance charges for the product to the DVR  
Repair Facility. ISD reserves the right to substitute Factory Refurbished Parts and / or Factory Refurbished Product in place of  
those in need of repair.  
Step-by-step Procedures - How to Obtain Warranty Service  
[1] Verify operation of the unit by checking the instruction manual and web site for the latest updates at  
[2] If there is a defect in material or workmanship, contact the Surveillix DVR Support Center at (877) 855-1349 [877-1-FIX] to speak  
to a technical support representative and schedule service.  
[3] Arrange for delivery of the product to the Surveillix DVR Repair Facility. Products must be insured and securely packed,  
preferably in the original shipping carton. A letter explaining the defect and a copy of the bill of sale or other proof of purchase must  
be enclosed with a complete return street address and daytime telephone number. The Tracking Number should also be indicated  
on your documents. Charges for transportation and insurance must be prepaid by the end-user.  
Critical Use Disclaimer  
The product is not designed for any “critical applications.” “Critical applications” means life support systems, exhaust or smoke  
extraction applications, medical applications, commercial aviation, mass transit applications, military applications, homeland security  
applications, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life  
or catastrophic property damage. Accordingly, Toshiba disclaims any and all liability arising out of the use of the product in any  
critical applications.  
Your Responsibilities  
The above warranty is subject to the following conditions:  
[1] You must retain the bill of sale or provide other proof of purchase.  
[2] You must schedule service within thirty days after you discover a defective product or part.  
[3] All warranty servicing of this product must be made by the Surveillix DVR Repair Facility.  
[4] The warranty extends to defects in material or workmanship as limited above, and not to any products or parts that have been  
lost or discarded by user. The warranty does not cover damage caused by misuse, accident, improper installation, improper  
maintenance, or use in violation of instructions furnished by ISD. The warranty does not extend to units which have been altered or  
modified without authorization of ISD, or to damage to products or parts thereof which have had the serial number removed, altered  
defaced or rendered illegible.  
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES  
SET FORTH ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation  
may not apply. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS HEREBY LIMITED, THE  
FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WITH RESPECT TO THE REPAIR OR  
REPLACEMENT OF ANY PRODUCTS OR PARTS. IN NO EVENT SHALL ISD BE LIABLE FOR CONSEQUENTIAL OR  
INCIDENTAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages so  
the above limitation may not apply.  
No person, agent, distributor, dealer, service station or company is authorized to change, modify or extend the terms of  
these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any  
obligation of ISD arising under this warranty or under any statute, or law of the United States or any state thereof, is  
hereby limited to one year from the date you discover or should have discovered, the defect. This limitation does not apply  
to implied warranties arising under state law. Some states do not permit limitation of the time within which you may bring  
an action beyond the limits provided by state law so the above provision may not apply to user. This warranty gives the  
user specific legal rights, and user may also have other rights, which may vary from state to state.  
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.  
Imaging Systems Division  
Copyright © 2007 Toshiba America Information Systems, Inc. All rights reserved.  
 
v
Rack Mount Instructions  
A) Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the  
rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment  
in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.  
B) Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe  
operation of the equipment is not compromised.  
C) Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due  
to uneven mechanical loading.  
D) Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect  
that overloading of the circuits might have on over current protection and supply wiring. Appropriate consideration of  
equipment nameplate ratings should be used when addressing this concern.  
E) Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given  
to supply connections other than direct connections to the branch circuit (e.g. use of power strips).  
UL Notice  
Underwriters Laboratories Inc. has not tested the performance or reliability of the security or signaling aspects of this product. UL  
has only tested for fire, shock and casualty hazards as outlined in UL’s Standard for Safety UL 60950-1. UL Certification does  
not cover the performance or reliability of the security or signaling aspects if this product. UL MAKES NO REPRESENTATIONS,  
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY  
SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.  
 
vi  
CE Notice  
This product is in conformity with the following European Directives:  
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE, 89/336/EEC  
(as amended by 92/31/EECand by Article 5 of 93/68/EEC)  
per the provisions of:  
EN 55022:1994  
EN 55024:1998  
EN 61000-4-4:1995  
EN 61000-4-5:1995  
EN 61000-4-6:1995  
EN 61000-4-11:1994  
EN 61000-3-2:1995  
EN 61000-3-3:1995  
CISPR 22:1997  
CISPR 24:1997  
EN 61000-4-2:1995  
EN 61000-4-3:2002  
LOW VOLTAGE DIRECTIVE, 73/23/EEC  
(as amended by Article 13 of 93/68/EEC)  
per the provisions of:  
EN 60950-1: 2001  
Safety Precautions  
WARNING  
RISK OF ELECTRICAL SHOCK  
DO NOT OPEN  
WARNING :  
TO REDUCE THE RISK OF ELECTRICAL  
SHOCK, DO NOT REMOVE COVER. NO USER  
SERVICEABLE PARTS INSIDE. REFER SERVICING TO  
QUALIFIED  
SERVICE  
PERSONNEL.  
WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE  
TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.  
DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.  
 
vii  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read Owner’s Manual  
After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instructions.  
2. Power Sources  
This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power  
supply to your business or home, consult your product dealer or local power company.  
3. Ventilation  
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from  
overheating, and these openings must not be blocked or covered. The product should not be placed in a built-in installation such as  
a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.  
4. Heat  
The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other products that produce  
heat.  
5. Water and Moisture  
Do not use this product near water. Do not exceed the humidity specifications for the product as detailed in the Appendix section in  
this manual.  
6. Cleaning  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for  
cleaning.  
7. Power Cord Protection  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed against them, paying  
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.  
8. Overloading  
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrical  
shock.  
9. Lightning  
For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from  
the wall outlet. This will prevent damage to the product due to lightning and power line surges.  
10. Object and Liquid Entry Points  
Never insert foreign objects into the NVR unit, other than the media types approved by Toshiba, as they may touch dangerous  
voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the product.  
11. Accessories  
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious personal injury  
and serious damage to the product.  
 
viii  
IMPORTANT SAFETY INSTRUCTIONS  
12. Disc Tray  
Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.  
13. Burden  
Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to  
the product.  
14. Disc  
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product  
malfunction.  
15. Damage Requiring Service  
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions.  
When the power–supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into the product.  
If the product has been exposed to rain or water.  
If the product does not operate normally by following the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician to restore the product to its normal operation.  
If the product has been dropped or damaged in any way.  
When the product exhibits a distinct change in performance – this indicates a need for service.  
16. Servicing  
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified personnel.  
17. Replacement Parts  
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or  
have the same characteristics as the original part. Unauthorized substitutions may result in fire, electrical shock, or other hazards.  
18. Safety Check  
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the  
product is in proper operating condition.  
 
ix  
Notes on Handling  
Notes on Maintenance  
When shipping the NVR unit, the original shipping carton  
packing materials come in handy. For maximum protection,  
repack the unit as it was originally packed at the factory.  
This NVR unit is designed to last for long periods of time. To keep  
your NVR unit always operational we recommend regular inspection  
maintenance (cleaning parts or replacement). For details contact  
your nearest dealer.  
Do not use volatile liquids, such as insect spray, near the NVR  
unit. Do not leave rubber or plastic products in contact with the  
NVR unit for long periods of time. They will leave marks on the  
finish.  
Notes on Moisture Condensation  
Moisture condensation damages the NVR unit. Please read the  
following carefully.  
The top and rear panels of the NVR unit may become warm  
after long periods of use. This is not a malfunction.  
Moisture condensation occurs during the following cases.  
When you bring the NVR unit directly from a cold place to a  
warm place.  
Notes on Locating  
Place the NVR unit on a level surface. Do not use it on a shaky  
or unstable surface such as a wobbling table or inclined stand.  
When you use the NVR unit in a room where you just turned on  
the heater, or a place where the cold wind from the air  
conditioner directly hits the unit.  
When you place this NVR unit next to a TV, radio, or VCR, the  
playback picture may become poor and the sound may be  
distorted. In this case, place the NVR unit away from the TV,  
radio, or VCR.  
In the summer, when you use the NVR unit in a hot and humid  
place just after you move the unit from an air conditioned room.  
When you use the NVR unit in a humid place.  
Notes on Cleaning  
Use a soft dry cloth for cleaning.  
Do not use the NVR unit when moisture condensation may  
occur.  
For stubborn dirt, soak the cloth in a weak detergent solution,  
wring well and wipe. Use a dry cloth to wipe it dry.  
Do not use any type of solvent, such as thinner and benzene,  
as they may damage the surface of the NVR unit.  
If you use the NVR unit in such a situation, it may damage discs and  
internal parts. Remove any CD discs, connect the power cord of the  
NVR unit to the wall outlet, turn on the NVR unit, and leave it for two  
to three hours. After two to three hours, the NVR unit will have  
warmed up and evaporated any moisture. Keep the NVR unit  
connected to the wall and moisture will seldom occur.  
If you use a chemical saturated cloth to clean the unit, follow  
that product’s instructions.  
 
x
Table of Contents  
PREFACE......................................................................................................................................................................1  
ABOUT THIS GUIDE ................................................................................................................................................1  
TECHNICIAN NOTES...............................................................................................................................................1  
INTRODUCTION............................................................................................................................................................2  
PRODUCT DESCRIPTION.......................................................................................................................................2  
FEATURES ...............................................................................................................................................................2  
CONTROLS AND CONNECTIONS...............................................................................................................................3  
BASIC FEATURES ...................................................................................................................................................4  
FRONT PANEL CONTROLS AND LEDS .................................................................................................................5  
NVR 4U Chassis...................................................................................................................................................5  
NVR 5U Chassis...................................................................................................................................................6  
REAR PANEL CONNECTORS .................................................................................................................................7  
NVR 4U Chassis...................................................................................................................................................7  
NVR 5U Chassis...................................................................................................................................................8  
GETTING STARTED .....................................................................................................................................................9  
IDENTIFYING INCLUDED COMPONENTS............................................................................................................10  
KEYBOARD SETUP ...............................................................................................................................................11  
MOUSE SETUP ......................................................................................................................................................11  
MONITOR SETUP ..................................................................................................................................................12  
POWER SETUP......................................................................................................................................................12  
CONNECTING A VIDEO SOURCE ........................................................................................................................12  
HARD DRIVE ARRAY.............................................................................................................................................13  
Swapping a Hard Drive.......................................................................................................................................13  
OPTIONAL COMPONENTS....................................................................................................................................14  
APPENDIX A...............................................................................................................................................................16  
NVR SPECIFICATIONS..........................................................................................................................................17  
 
1
PREFACE  
ABOUT THIS GUIDE  
This manual is a setup and maintenance guide that can be used for reference when setting up the NVR unit and for troubleshooting  
when a problem occurs. Only authorized personnel should attempt to repair this unit.  
Toshiba reserves the right to make changes to the NVR units represented by this manual without notice.  
The following text mark special messages throughout this guide:  
NOTE: Text set off in this manner indicates topics of interests that can help the user understand the product better.  
TIP: Text set off in this manner indicates topics and points of interests that can be helpful when using or settings up the NVR unit.  
TECHNICIAN NOTES  
WARNING: Only authorized technicians trained by Toshiba should attempt to repair this NVR unit. All troubleshooting  
and repair procedures that may be shown are for reference and minor repair only. Because of the complexity of the  
individual components and subassemblies, no one should attempt to make repairs at the component level or to make  
modifications to any printed wiring board. Improper repairs can create a safety hazard. And any indications of  
component replacement or printed wiring board modifications may void any warranty.  
WARNING: To reduce the risk of electrical shock or damage to the equipment:  
Do not disable the power grounding plug. The grounding plug is an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.  
Disconnect the power from the computer by unplugging the power cord either from the electrical outlet or the  
computer.  
CAUTION: To properly ventilate your system, you must provide at least 3 inches (7.6 cm) of clearance at the front and  
back of the NVR unit.  
 
2
INTRODUCTION  
PRODUCT DESCRIPTION  
A Surveillix NVR is simply a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer,  
including processing power, storage capacity, graphics compression, network cameras and security features, the NVR unit is more  
powerful than the analog recorders of the past with its ability to utilize digital network cameras.  
The Surveillix NVR server software comes pre-configured for fast and seamless integration within your existing IT infrastructure.  
Designed around Microsoft® Windows® XP Embedded, the server software offers unparalleled stability, security, and ease of use.  
Accordingly, your security investment has never been easier to maintain. Multiple users may simultaneously connect through any  
network connection for instantaneous live viewing, digital search, and off site video storage. Users can also connect remotely through  
DSL, Cable Modems, ISDN, or 56K dial-up. This powerful software enables users to establish recording schedules, create motion  
detection zones, use PTZ controls, and configure alarm inputs and outputs for each of the system's cameras. With the latest  
advancements in the NVR Server Software, searching and indexing your video archive has never been easier. Video can now be  
found, viewed, and exported in a number of file formats with just a few clicks.  
The Surveillix NVR is high performance security product ready to meet today’s security demands.  
FEATURES  
Toshiba’s Surveillix NVRs include the following features:  
Field Upgradeable, Replaceable HDD Array  
Large Storage Capacities (Over 2 TB)  
Internal RAID 5 (optional)  
Removable HDD bays for quick and easy maintenance  
PAN / TILT / ZOOM Controls on supported IP Cameras  
Simultaneous Search, Playback and Backup  
Up to 16 IP Cameras  
Multiple Levels of Security Access  
Output the video to an NTSC/PAL display  
Advanced POS and ATM support  
Continuous, Motion Detection and Alarm Recording Modes  
Video Signal Loss Detection  
Records at the Encoding Resolution of the IP Camera  
Digital Signature Support for Tamper Proof Exporting  
Up to 8 TB External RAID 5 Available  
Output the Video to a NTSC/PAL Display  
 
3
CONTROLS AND CONNECTIONS  
This chapter includes the following information:  
Input/Output connector locations  
Front Panel Controls and LEDs  
Rear Panel Connectors  
 
4
BASIC FEATURES  
Surveillix™ state-of-the-art High Definition Digital Recorders are housed in a high performance and versatile 5U or 4U Aluminum  
Rack-Mount case allowing easy storage of multiple NVRs for enterprise applications. Every Surveillix NVR Unit comes equipped with  
the latest technology:  
Intel® Dual Core 3.4 Ghz CPU  
10/100/1000 Gigabit Ethernet  
1GB of System Memory  
128 MB Video Card  
DVD±RW Recorder  
Full Duplex High-Fi Sound Functionality  
 
5
FRONT PANEL CONTROLS AND LEDS  
The front panel of the NVR unit contains the devices that will be commonly used for data removal, retrieval, and backup replacement.  
The most common components and buttons are shown below.  
NVR 4U Chassis  
DVD±RW Drive  
Hard Drive Array  
Cooling Fan Air Intake  
Hard Drive Activity &  
Power LEDs  
On / Off Power Switch  
USB Ports  
 
6
NVR 5U Chassis  
Hard Drive Activity &  
Power LEDs  
DVD±RW Drive  
USB Ports  
On / Off Power Switch  
Hard Drive Array  
Cooling Fan Air Intake  
Hard Drive Array  
 
7
REAR PANEL CONNECTORS  
The rear panel of the NVR unit contains virtually all of the connectors you will be using. Below is a diagram that outlines the location  
and description of each connector:  
NVR 4U Chassis  
SVGA Monitor Out  
S-Video Out  
Audio  
AC Power  
Connector  
Line In  
Speaker Out  
Mic In  
Secondary Power Switch  
USB Ports  
PS/2 Mouse Input  
RJ-45 Network Jack  
PS/2 Keyboard Input  
Fire Wire (w/ RAID only)  
DB-9 Serial Input 1  
SVGA Output  
LPT Parallel Printer Port  
 
8
NVR 5U Chassis  
SVGA Monitor Out  
S-Video Out  
AC Power  
Connector  
Audio  
Line In  
Speaker Out  
Mic In  
Secondary Power Switch  
USB Ports  
PS/2 Mouse Input  
PS/2 Keyboard Input  
DB-9 Serial Input 1  
RJ-45 Network Jack  
Fire Wire (w/ RAID only)  
SVGA Output  
LPT Parallel Printer Port  
 
9
GETTING STARTED  
This chapter includes the following information:  
Included Components  
Setting up your NVR Hardware  
Optional Components  
 
10  
IDENTIFYING INCLUDED COMPONENTS  
Surveillix™ NVRs come with a mouse, keyboard and selected software and cables. Identify the following components to make sure  
everything has been properly included with your new NVR unit. If any of the following items are missing, contact your dealer to arrange  
a replacement.  
Included Components:  
NVR Unit  
Mouse  
NVR Key  
Software Installation CD  
Power Cable  
HVR/NVR  
Digital Video Recorder  
User Manual  
model  
n
o
.
HVR8-X  
HVR16-X  
HVR32-X  
NVR8-X  
NVR16-X  
Plea  
s
e
c
arefully re  
a
d
these instructions before using this  
p
roduct  
.
Savethis  
m
a
nualfo  
r
futureuse.  
Manual  
Repair CD  
Keyboard  
Rackmount Attachments with Screws  
 
11  
KEYBOARD SETUP  
To attach the keyboard to the NVR unit, plug the end of the Keyboard into the keyboard PS/2 Port located on the back of the machine.  
The keyboard PS/2 Port can be identified by the purple color. Refer to the Rear Panel Connectors diagram for more information.  
MOUSE SETUP  
To attach the mouse to the NVR unit, plug the end of the mouse into the mouse PS/2 Port located on the back of the machine. The  
mouse PS/2 Port can be identified by the green color. Refer to the Rear Panel Connectors diagram for more information.  
The mouse uses a cursor. Cursors come in many different shapes but are most commonly shaped like an arrow.  
Your mouse has two buttons: a left button and a right button. Quickly pressing and releasing one of these buttons is called clicking.  
Sometimes you will need to double-click – or click the same button twice quickly.  
In this manual, click means to position your mouse cursor on an icon and to single click the left button. When a right click is required,  
this is stated clearly. Double-click also refers to the left button.  
The scroll wheel in between the two buttons is added to provide easier scrolling capability. By simply moving the wheel with your index  
finger, you can quickly move through multiple pages, line, or windows. The wheel may also function as a third button allowing you to  
quickly click or double-click an icon or a selected item.  
Scroll Wheel / Third Button  
Right Button  
Left Button  
 
12  
MONITOR SETUP  
There are up to 2 available connections for monitors which can be used individually or in tandem.  
SVGA Output  
To VGA Monitor.  
S-Video Output  
To TV/VCR.  
Attach the Monitor or Monitors to the Rear of the NVR unit using the cable supplied by the Monitor Manufacturer. Refer to your monitor  
manual for detailed information on how to setup and use it.  
NOTE: The monitor must be capable of having a screen resolution of 1024 x 768 and display colors of at least 32 Bit  
POWER SETUP  
Attach the AC power cable to the rear of the NVR Unit. See Rear Panel Connectors for more information.  
WARNING: To reduce the risk of electrical shock or damage to the equipment:  
Do not disable the power grounding plug. The grounding plug is an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.  
Disconnect the power from the computer by unplugging the power cord either from the electrical outlet or the  
computer.  
CONNECTING A VIDEO SOURCE  
The NVR, or Network Video Recorder has no visible video inputs because the NVR unit connects and records only using IP / Network  
video cameras. To connect video sources to the NVR unit, simply plug in a network cable to the NVR unit.  
 
13  
HARD DRIVE ARRAY  
Handle Release  
Button Lock  
Release Handle  
LOCK  
OPEN  
Reset Button  
LOCK  
OPEN  
Hard Drive  
Power Buttons  
LOCK  
OPEN  
LOCK  
OPEN  
Alarm Light  
NOTE: The Alarm Light will turn on if the Hard Drives reach a temperature above safe operating conditions  
Swapping a Hard Drive  
1. Press the hard drive power button to turn off power to  
the hard drive you wish to remove.  
2. Turn the button lock to the open position and push the  
handle release button.  
3. Pull the lever outward while removing the hard drive.  
Reverse steps to install.  
 
14  
OPTIONAL COMPONENTS  
To fully utilize the NVR unit’s potential, several optional Surveillix components are listed below. Contact your dealer for more  
information.  
Extra Video Storage Hard Drive – Each NVR unit has a virtually unlimited storage potential. By adding additional Video Data  
Hard Drives you can extend the amount of Video Data your NVR system can store before overwriting older data.  
NP-FM56USB 56K External Modem – This 56K modem allows you to connect the NVR to a standard phone line. Using this  
modem, you can either connect the unit to the Internet or allow a direct NVR to computer connection.  
PW-UPS  
UPS Power Backup – UPS Power Backups allow your NVR unit to remain fully functional even in the event of a  
power failure. UPS Power Backups also even the fluctuating power current out to provide a consistent, reliable power flow. This  
creates a stable environment for the NVR unit and reduces failure.  
NP-4PKVM  
4 Channel KVM Switch – The 4 Channel KVM switch allows you to have multiple boxes (up to 4) using only  
one keyboard, mouse and monitor. You can simply switch between the NVR units using the keyboard.  
Hot Swappable Redundant Power Supplies – Every NVR and EVR has the option of a dual redundant hot swappable power  
supply. In the event of a component failure the inoperable power supply may be removed leaving the NVR running so no break in  
recording occurs. Simply replace the power supply with a new one and you are finished.  
Raid Controller – A raid controller is available for increased performance or data reliability.  
 
15  
 
16  
APPENDIX  
The Appendix contains technical specifications for many of the NVR internal components  
 
17  
NVR SPECIFICATIONS  
8
16  
Intel® Dual Core 3.4 GHz CPU  
CPU  
Storage (Hard Drive)  
Storage MAX  
250 GB Standard / Virtually Unlimited Storage Potential  
Up to 8 HDD with DVD±RW  
Operating System  
Viewing Rate  
Microsoft® Windows® XP Embedded  
Max 480 PPS  
Dependant on Network Video Device Encoding Rate  
Recording resolutions dependant upon the resolutions the Network Camera supports  
MJPEG  
Recording Rate  
Resolution  
Image Compression  
360x240 – 3~5k  
Average File Size  
720x240 – 4~8k  
720x480 – 7~12k  
Video Outputs  
S-Video, SVGA  
Max PPS Per Channel  
Motion Detection  
Remote Operation  
Remote Software  
PAN / TILT / ZOOM  
Recording Mode  
Backup  
30 PPS (NTSC) / 25 PPS (PAL)  
Up to 5 Regions Per Channel / Adjustable Sensitivity  
Full Remote Control Through PSTN, ISDN, ADSL, LAN, and TCP/IP  
Compatible with Microsoft Windows 2000,XP  
Built in Software Interface  
Continuous, Motion Detection, Sensor, Scheduled Recording  
USB, DVD±RW  
Digital Signature  
Emergency Agent  
Supports Digital Signature Verification  
Transmitted through TCP/IP – Pop-Up Window  
 

Teac Stereo Receiver MC DX220i User Manual
TechniSat Car Stereo System Car Radio User Manual
Texas Instruments Calculator TMS320DM6446 DVEVM v20 User Manual
Toshiba All in One Printer Workgroup17 User Manual
Toshiba Security Camera IK 7200A User Manual
Toto Indoor Furnishings TMT1HNCR User Manual
Video Products Computer Hardware PCHD HDMI SCALER User Manual
Vinotemp Refrigerator VINO 1500SS User Manual
VXI Headphones TP150 User Manual
VXI Network Card Two Way USB Adapter User Manual