DKT / IPT Telephone
Quick Reference Guide
STRATA
Business Telephones
Helping You
Communicate Better
CIX/CTX
Which Codes Do I Use?
Default feature codes are listed in this guide. Check with your System
Administrator to see if these codes have been changed. If so, write the
new codes in the blank lines and cross out the default codes. For
example:
Cnf/Trn + #46 or
.
Making a Call
Hot Dialing
1. To make a call using Hot Dialing, dial the number.
2. When connected, you can continue speakerphone operation or
lift the handset and continue the conversation.
Spkr Button
1. To make a call, press Spkr.
2. Dial the number.
3. When connected, you can continue to use the speakerphone or
lift the handset and continue the conversation.
Handset
1. To make a call, lift the handset, then dial the number.
2. When connected, you can continue to use the handset or switch
to speakerphone by holding down Spkr and replacing the
handset.
Dial Directory
1. Press SK1 or Mode from your telephone (shown right). The
Select Directory menu appears.
Note The soft keys on the
Select Directory are:
My = Personal SD Names
EXTR= Sys. SD Names
INTR = Directory No. Names
Dial = Cancel directory, get
dial tone.
2. Press the appropriate soft key
and use the dial pad to enter the first character of the name
...or if you do not select a directory, you can go directly to the
dial pad and enter a character. This makes names from all
directories available.
3. Press Find soft key to start the Dial-directory search.
4. Press Next soft key to go through the directory until you see
the name.
5. Press Call soft key to call.
6. Press Back soft key to go back through the directory.
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
3
Handsfree Answerback
!
To receive a hands free internal call over the speakerphone
1. You hear a single long tone, then the caller’s voice. Do not lift
the handset; speak toward the telephone in a normal voice.
2. Press Spkr or take the handset off-hook if you wish to
transfer the call or place it on hold.
!
To switch between Handset and Speakerphone
! Press Spkr and place the handset on-hook to switch from
Handset to Speakerphone mode.
Account Code Calls
!
To dial with a Forced Account Code (FAC)
1. Place a call in the normal method.
2. After the tone burst, enter the Account Code.
If the code is invalid, you hear re-order tone and the call is
rejected.
!
!
To use an Emergency Override of an FAC
You can bypass Forced Account Code requirements with three
emergency numbers, including 911. See your System
Administrator for these numbers: ____________
To dial with Voluntary Account Codes
1. After accessing a CO line, press Account Code
...or Cnf/Trn + #46 ________.
You can enter it at any time during a call.
2. Enter the Account Code.
You should hear confirmation tone if the code is valid or two
short tones if it is invalid.
3. Dial a telephone number if you entered the code after
accessing an outside line or resume talking or hang up if you
entered the code after the call.
Call Transfer
1. While on a call, press Cnf/Trn.
2. Dial the extension and announce the call or “blind transfer”
(hang up).
During call transfer, you can reconnect to the original caller by
pressing your flashing extension button.
3. Camp on to a busy station: If the station is busy, hang up. The
called station receives a tone. Once the busy line is free, the
transferred line is called back.
4
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
Conference Calls
1. While on a call, press Cnf/Trn.
2. Call another station or outside line.
3. When the called party answers, press Cnf/Trn. If it’s busy or
there’s no answer, press Cnf/Trn again to return to the
original connection. All parties are conferenced.
4. Repeat the above steps to add more lines. You can conference
up to eight parties.
Note When the person who initiates the conference
(master) hangs up, control transfers to the first internal
station added to the conference. If no internal stations are in
the conference, the call disconnects.
!
!
To transfer conference control
1. Do steps 1 and 2 above to add the line to which you wish to
transfer conference control.
2. Announce the call and hang up to transfer the call. This station
is now the conference “master” with the ability to add or delete
parties.
To hold a conference call
! If you are the “master” conference controller, press Hold once
(or twice for Executive Hold) to place the conference call on
hold.
The conference continues and you can join at any time without
giving up “master” abilities. Music-on-hold is suppressed in
this mode.
!
!
To delete the last member added to a conference
! While a call is in progress, press the Cancel button.
To conference two outside Lines
1. While talking on an outside call, press Cnf/Trn.
2. Access an outside line.
3. After the party answers, press Cnf/Trn.
4. If you receive a busy tone or if the station does not answer,
press the flashing button to return to the original call.
5. Press Cnf/Trn and hang-up.
Note Most phone companies provide auto disconnect, but
if it is not provided, the lines must be supervised to
disconnect.
6. To supervise a tandem call, press the extension button. If the
parties have finished, hang up or if the parties are still talking,
press Cnf/Trn and hang-up.
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
5
Hold
1. To place a call on Hold, press the Hold button.
2. To return to the held call, press the held line’s button.
If you do not return to the held call, it rings back to your phone.
If you are busy on another call, you hear two tone bursts. If the
held party hangs up, the call is released.
3. If you have additional lines at your station to hold, repeat Step
1 above.
!
!
To place a call on Exclusive Hold
! While on a call, press Hold twice. (No one can accidently
pick up your call.)
To place a call on Automatic Hold
! While on a call, press another extension button to receive/
originate a new call. You can switch between calls without
having to press Hold.
Make sure this feature is programmed on your system; if not,
existing calls will drop.
!
To place a call on Consultation Hold
If you have multiple extensions on your phone, you can hold a
different call on each extension.
! Press Cnf/Trn.
Call Forward - Any Calls (Internal & External)
There are two ways to perform each Call Forward:
!
Enter the button sequence below
All Calls: Press Ext. + #6011 or ________ + Destination No.
Busy: Press Ext. + #6021 or ________ + Dest. No.
No Answer: Press Ext. + #6031 or ________ + Dest. No. +
Timer (seconds, 2-digits) + #
Busy No Answer: Press Ext. + #6041 or ________ + Dest.
No. + Timer (seconds, 2-digits) + #
Cancel: Press Ext. + #6051 or ________
...or program a flexible button to perform the sequence
See “Flexible Buttons” for instructions.
!
6
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
Call Park Orbits
!
To park a call
1. While on a call, press Park in Orbit
...or Cnf/Trn + #33 or ________ .
2. Specify the Park Orbit using one of the following:
•
Press and the system automatically selects a General
Park Orbit between 7000~7019. The chosen orbit
appears on the LCD.
*
•
•
Enter a valid extension.
Press # and the system automatically selects your
extension as the orbit.
3. Hang up. If the parked call is not retrieved, the call rings back
to your phone.
!
To retrieve a parked call
1. Press Park in Orbit
...or your extension button + #32 or ________ .
2. Enter the Orbit Number where the call is parked.
Call Pickup
1. Press an extension button.
2. Enter a code from the following list:
Group Pickup: #5#34 or ________
Directed Terminal Pickup: #5#5 or ________
Other (see System Administrator):_________
3. Dial the extension that is holding the ringing or held call to be
picked up.
Echo Cancel
!
If you experience echo while conversing on your IP telephone,
tap Vol " or # once to cancel the echo sound.
Paging
!
To make a page announcement to a phone or external
speakers
1. Press extension, lift the handset, and enter:
#30 or ________ (all groups)
..or #31 or ________ + _____ the Group page access code.
See “Flexible Buttons” for more paging codes.
2. Make your announcement, then hang up.
!
To make an All Call Page
1. With the handset off-hook, press All Call Page
...or extension + #30. This pages all phones in the All Call
Page Group, and may page external speakers (depends on
programming).
2. Make your announcement then hang up.
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
7
Redial
Use this button to redial the last number dialed from your phone.
!
To redial the last number, press Redial or 0.
*
Speed Dial
!
To store a Station Speed Dial Number
We suggest storing Speed Dial numbers on a One Touch button;
use Speed Dial Codes to store more numbers.
1. Press Program or dial #9876.
2. Press Spdial.
3. Press 1, then enter a Speed Dial Code (00~99).
4. Enter the number to be stored in the Speed Dial bin (32 digits
max.).
5. Press Spdial to store the entry. See “DATA
PROGRAMMED.”
6. Lift and replace the handset.
!
!
To clear a number from a Station Speed Dial code
! Repeat the previous procedure skipping Step 4.
To make a call using Speed Dial
1. Lift the handset.
2. Access a outside line (if necessary).
3. Press Spdial. Then dial the Station or System Speed Dial
Number.
One Touch Buttons
This feature is useful for storing frequently dialed numbers.
!
To change a One Touch Button
1. Press #9876 to enter User Programming Mode.
2. Press the One Touch button to set.
3. Enter the digits or special buttons to be stored.
4. Press the One Touch button to save the entry.
If these steps do not work, you may have to create a One Touch
button (see “Flexible Buttons” ).
!
To Use a One Touch Button, just press it.
8
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
Voice Mail Call Monitor
System Availability: Only with Strata CTX28
!
To enable and disable Voice Mail Call Monitor
1. Press Call Monitor button.
2. Enter your voice mail password, then press #.
!
!
To cancel Call Monitor
! Press Call Monitor button.
To monitor a call using Call Monitor
1. The flashing Call Monitor button indicates that a message is
being recorded in voice mail.
2. To listen, press the Call Monitor button.
3. To talk to the caller, press the Call Monitor button again.
Voice Mail - Direct Transfer
1. While on a call, press Cnf/Trn.
2. Press #407 ____.
3. Enter the voice mailbox number (may be the same as the
extension number), then press #.
4. Hang up (the caller is connected to the voice mailbox) or press
Cnf/Trn to return to the calling party.
Volume Control
!
!
!
To adjust handset volume
! During a call, press down Vol " or #. When you hang up,
volume returns to default.
To adjust the speaker volume for internal/external calls and
background music
! Press Spkr. Select a line and press Vol " or #.
To adjust Ring Tone, Handsfree Answerback and Speaker
Off-hook Call Announce
! With an idle phone and handset on-hook, press Vol " or #.
When you hang up, volume returns to default.
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
9
IPT2008-SDL / DKT3014/3214-SDL LCD Features
!
To use Direct Station Selection
1. Press the DIRECT SS Soft Key to view the first screen.
2. Press the soft keys MORE or PREVIOUS to view the other
pages.
3. To select someone from the list, press the Soft Key next to the
name.
!
To use Speed Dial
1. Press the Soft Key next to the SYSTEM SD or
PERSONAL SD to view the first screen.
2. Press the soft keys MORE or PREVIOUS to view the other
pages.
3. Select someone from the list by pressing the Soft Key next to
the name.
!
To use Directory Menu
1. Press the EXTERNAL DIR or INTERNAL DIR to view the
first screen. The directory list displays.
2. Press the soft keys MORE or PREVIOUS to view the other
pages.
3. Select someone from the list by pressing the Soft Key next to
the name.
Flexible Buttons
There are 10, 14 or 20 Flexible Buttons on your telephone. You can
program features onto Flexible Buttons for easy access.
1. Press #9876 to enter User Programming Mode.
2. Press Hold.
3. Press the Flexible Button to set or change.
4. Enter the Flexible Button Code (see following list).
5. Press the same Flexible Button (flashing). “DATA
PROGRAMMED” appears on your LCD.
10 Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
Flexible Button Codes
Account Code
660
150
160
Auto Busy Redial
Auto Callback
Call Forward - Any Calls (Internal and External)
All Call
340
350
360
370
170
Busy
No Answer
Busy No Answer
Call Park Orbit
Call Pickup
Incoming - Group Pickup
Incoming - Directed Terminal Pickup
Incoming - Directed Group Pickup
Incoming - Directed DN Pickup
On hold - Local Retrieve
On hold - Remote Retrieve
On hold - Outside Line Retrieve
On hold - Directed DN Retrieve
Incoming - Any External Call
On hold and Incoming
Caller ID
430
440
450
460
490
500
480
510
470
520
580
290
180
540
610
570
Cancel
Do Not Disturb
Door Lock Cancel
Direct Station Selection (DSS) Button
One Touch Button
Paging
Page All Groups
220
230
250
240
590
630
640
270
280
260
650
Page Individual Groups
Emergency Page - Individual Group
Emergency Page - All Groups
Answer - Group Page
Record to VM
Pause/Resume
Release Button
Release/Answer
Speed Dial
User Programming Mode
Note Not all features have a Flexible Button Code. For
additional codes, see your System Administrator.
CAUTION! Do not use cleansers that contain benzene, paint
thinner, alcohol or other solvents on the
telephone's rubber feet. The color of the rubber
may transfer to the desk or mounting surface.
CIX-CTX-QRG-VB
Version B1, February 2007
Toshiba America Information Systems, Inc.,
Telecommunication Systems Division
9740 Irvine Blvd., Irvine, CA 92618-1697
© 2007 Toshiba America Information Systems, Inc. All product, service and company
names are trademarks, registered trademarks or service marks of their respective
owners. Information including without limitation product prices, specifications,
availability, content of services, and contact information is subject to change without
notice. Some features require optional hardware to support full capabilities.
|
Taylor Refrigerator taylor User Manual
Timex Watch 714 095005 01 User Manual
Traulsen Refrigerator TR35761 User Manual
TRENDnet Computer Accessories TK 210 User Manual
Tripp Lite TV Cables P312 006 User Manual
Uniden Cordless Telephone DECT1080 User Manual
ViewSonic Computer Monitor VX2439WMH User Manual
ViewSonic Flat Panel Television VP171 User Manual
Vivotek Security Camera IP8335H User Manual
Vizio Video Games M320SL User Manual